|
P.O. Box 1671
Oregon City, Or. 97045
Phone 503-632-3225 / Fax 503-632-6665
Toll Free 1-800-218-5984
Global Mfg. - Products
Index
- Ball Vibrators
- Design Series
Vibrators
- High-Frequency
Vibrators
- Piston Vibrators
- Electric Vibrators
- Air Blasters
High-frequency rotary vibration for handling powders,
chemicals, and fine bulk solids. Enhances material flow. Provides quiet,
reliable operation. Reduces operating costs and minimizes
down-time.
There are four basic types and 14 models to choose from,
rated from 25 force pounds to 680 force pounds and from 3,100 to 22,000
vibrations per minute at temperatures up to 250°F. Multiple ball vibrators
can be used on a single hopper or bin to handle even greater loads. |
|
Back to Index
--The "Design Series" Rotary Vibrators for handling large
loads of bulk solids. |
|
|
Pneumatic and hydraulic rotary vibration for handling
powders, large aggregates, sludges, and other bulk solids. Provides efficient,
reliable operation. Extremely effective with large loads other vibrators cannot
handle. Long operating life, minimal maintenance, quiet operation.
Global Design Series vibrators use efficient, superbly designed pneumatic or
hydraulic motors to generate powerful rotary vibrations capable of moving loads
up to 70,000 pounds and higher. Many styles and models available for your
need. |
Back to Index
These High- Frequency Vibrators are air-driven and externally
mounted, contain no bearing or motors, and feature a unique dual-roller design
that significantly enhances performance and reliability.
There are two
basic types and eight models to choose from, rated from 1,750 to 6,600
force-pounds and from 7,600 to 15,400 vibrations per minute. These vibrators
can handle loads as heavy as 66,000 pounds operating at pressures from 40 to 80
psi. Larger loads can be accommodated by mounting multiple vibrators on a
single container.
These units are the Vibrator of Choice for Concrete
Consolidation. |
|
Back to Index
|
The
Piston Series vibrators feature a heavy-duty unibody contruction. There are 2
basic types (impacting and air cushion) and 10 models to choose from, rated
from 1,500 to 12,700 vibrations per minute. These vibrators can handle loads in
bins with walls up to ½ inch thick, at pressures up to 60
psi.
Applied where maximum force is required to shake loose the trapped
solids. Ideal for storage hoppers, bins, and railcar unloading. |
Back to Index
Electric rotary vibrators are quiet, reliable, have a
low-cost of operation. They have a rugged heavy duty design and are available
in a wide range of voltages to meet any installation requirement. Quiet
Thunder® vibrators feature adjustable centrifugal force settings. Speeds of
either 1800 RPM or 3600 RPM are available, capable of handling loads as heavy
as 50,000 pounds with one vibrator. Multiple electric vibrators can be used on
heavier loads.
Choice of Voltages and Phases available:
- 115/230 volt single phase - AC
- 230/460 volt three phase - AC
- 575 volt three phase - AC
- 12 volt - DC
- (50 Hertz and other voltages available.)
|
|
Back to Index
|
High-powered
air and nitrogen blasters for dislodging trapped solids. Aerates stored
material. Gets "stuck" materials moving again. Provides quiet, reliable
operation. Reduces operating costs and minimizes down-time. Does not damage
bins or hoppers.
There are 5 models to choose from, with tank diameters
ranging from 8 to 30 inches and discharge orifice diameters from 2.5 inches to
6 inches. These Air Blasters can handle a wide range of material clogs and jams
in hoppers of any size, where they effectively blast loads ranging from hundres
to millions of cubic feet in volume. Multiple blasters can be used in larger
hoppers or bins for blasting even the biggest loads. |
Back to Index
|